The number of things that you must consider dealing with while you are renovating your current commercial site is an amazingly long list. If you are building a new structure, it is probably even longer. Everything from assuring the building, itself, has everything that you need and want to the landscaping. The grounds are also something that can take a significant amount of attention. That is not even mentioning the vehicle lots. For that, you will want to contact a company who does the parking lot striping AR contractors do every day.
The number of contractors in this area might surprise you. The local phone directories will list them, as will the newspaper classified sections. Other websites, such as business services review websites, will offer some helpful comments from other clients as they discuss the services of many of these companies. You will want to locate one that has a long list of previous clients that you can check on.
The fact that there really is a lot of science involved in this work may surprise you as well. It might be more specifically called mathematics as the length and width of your vehicle area will have to be measured, after it has been poured and ready for painting. These experts will need to figure out how many stalls can be inserted in the length available.
The width of the lot must be evaluated for much the same reason. The two, combined together, will help position the most spots for maximum usage. This is because the slots can be inserted perpendicular to each other or at an angle. Just the positioning can have a great effect on the entire usability of the lot, good or bad.
Each parking location is lined out on the surface using a chalk line to create straight lines. The appropriate color is used for each area and purpose for that area. The color plus a rubber additive is used to make it resistant to water, oil, and abrasion.
The local codes and regulations will identify the colors to be used in various areas. These lines are required to be approximately two and one half to four inches wide to ensure visibility. For the stalls, themselves the color is white and might even glow under the approve lighting in your lot.
Yellow is the color for curbs leading into the parking area. This is simply to indicate traveling areas and no parking spots. The red color will be used for no parking areas, such as by fire hydrants and around light poles. The use of red and white strips will indicate places for emergency vehicles and another emergency no parking.
Looking at all of the other campuses will indicate they have had some help in their parking lot in this respect. You should follow their lead in this project. It is helpful and morale boosting to allow your employees to park, comfortably. It also boosts your reputation points by welcoming your guests in this manner.
The number of contractors in this area might surprise you. The local phone directories will list them, as will the newspaper classified sections. Other websites, such as business services review websites, will offer some helpful comments from other clients as they discuss the services of many of these companies. You will want to locate one that has a long list of previous clients that you can check on.
The fact that there really is a lot of science involved in this work may surprise you as well. It might be more specifically called mathematics as the length and width of your vehicle area will have to be measured, after it has been poured and ready for painting. These experts will need to figure out how many stalls can be inserted in the length available.
The width of the lot must be evaluated for much the same reason. The two, combined together, will help position the most spots for maximum usage. This is because the slots can be inserted perpendicular to each other or at an angle. Just the positioning can have a great effect on the entire usability of the lot, good or bad.
Each parking location is lined out on the surface using a chalk line to create straight lines. The appropriate color is used for each area and purpose for that area. The color plus a rubber additive is used to make it resistant to water, oil, and abrasion.
The local codes and regulations will identify the colors to be used in various areas. These lines are required to be approximately two and one half to four inches wide to ensure visibility. For the stalls, themselves the color is white and might even glow under the approve lighting in your lot.
Yellow is the color for curbs leading into the parking area. This is simply to indicate traveling areas and no parking spots. The red color will be used for no parking areas, such as by fire hydrants and around light poles. The use of red and white strips will indicate places for emergency vehicles and another emergency no parking.
Looking at all of the other campuses will indicate they have had some help in their parking lot in this respect. You should follow their lead in this project. It is helpful and morale boosting to allow your employees to park, comfortably. It also boosts your reputation points by welcoming your guests in this manner.
About the Author:
Find a list of the reasons why you should use professional parking lot striping AR services and more info about a reliable service provider at http://www.arrowstriping-nwa.com right now.
0 comments:
Post a Comment