RSS

Using Plastic Bender Board For Landscaping

By Janet Davis


Sidewalks, flower gardens, homemade streams and other types of landscaping all have one thing in common. They have a border. There is a space where you don't want the turf or weeds to encroach. Using composite or plastic bender board will help resolve this issue by making sure you have a nice separation between the two types of landscaping.

Composite borders are made from wood fibers. They're still flexible enough to use and often are brown or tan to match the color of the soil. The nice thing about them is that they break down and join the soil over time. If you want something that will last a lot longer than a few years, you should use the plastic version. Either works well and your personal preference will be used to make the decision.

The plastic one is made from recycled plastics. This helps keep it environmentally sound because new material is not made for this. Instead, it is made in a similar fashion as the composite, but using plastic composite materials that won't break down. This one will last much longer and won't have to be replaced.

There is not much difference in how you install them. Measuring how much you need takes a bit of ingenuity. Put a stake in the ground at every turn and use a string to measure how much you need. If you want, add a little material length since you can easily cut off what you don't need.

Dig the trench and put stakes in to hold the board. The trench needs to be six inches wide and deep enough to cover the material. Leave the dirt nearby to fill in when you're near the last step. Place the stakes at intervals but on the side away from the grass or turf. Two stakes will be needed in places where there will be a break in the material, but the second one can be put in later when you know where the break will be.

Place the border in the trench. This step is pretty easy and straight forward. You want the material on the turf side. You'll then attach the material to the stakes to hold it down and in place. If you find spots where the border sticks up above the grass line, dig some dirt out to make it sit slightly below.

Fill in the dirt. This is why you want to keep the dirt near where you dug the trench. You'll be able to just push it over and fill in the area and cover the board. You shouldn't worry if the dirt sticks up a bit but do try to pack it down with your foot or a packer tool. Once it is settled you can add decorative rocks or other border material to make it look nice.

Creating a nice border is super easy using either type of material. This will keep weeds from growing up after you've placed nice decorative border rocks around the flower garden or other landscaping.




About the Author:



0 comments:

Post a Comment