RSS

When Do You Need A Chimney Restoration Northern Virginia Contractor?

By Marci Glover


With proper maintenance, homeowners can be sure of having fun moments at the fireplace for longer periods without problems. On the contrary, badly maintained chimneys can be the genesis of all home troubles. If you notice defects within chimneys, you need to consult chimney restoration northern Virginia contractors to inspect them and offer solutions.

In fact, many stacks have in the past broken down due to their disgraceful size. This may be due to the miniature nature of flues. Mammoth chimneys that are oversized may adequately fail to attain the required standards of draft size. The consequences experienced due to corrosion of the smokestack walls is usually great. First, these walls may become very cold especially if they are not insulated.

Too little or rather extra large chimneys fall short of merit when it comes to administering an adequate draft. Additionally, hindrances such nest of birds, broken blocks, and ice may block pathways thereby creating a smoke havoc in the interior of the chimneys and the home at large. Poor development and establishment of the smokestack may lead to corrosion of chimneys.

During the frosty weather spells, cracks are a common phenomenon understandably due to the cold climate. Weak chimneys walls hence suffer greatly and may stumble badly. Chimneys structures built on weak foundation may bend, lean, or even curl eventually giving birth to cracks in the mortar joints. Literally, movements may be initiated leading to crumbling of your structure eventually.

A chimney structure set on a defective or weak foundation probably during the construction process may lean, bend, or curl leading to the formation of cracks that are usually evident in mortar joints. Before this happens, one should take appropriate actions and consult a contractors experienced in repairing and restoring chimneys. For a masonry chimney, cracks may conjure due to thermal expansion. This may also affect its interior flue.

The likely consequence as a result, is the formation of cracks, which start emanating from the mortar joints. Arguably, thermal expansions are common phenomena in masonry chimneys. Due to thermal expansions, stacks are fond of having massive cracks. This does not go slow on the interior flue either.

Another causal agent of cracks on walls is mechanical damage resulting from earth tremors, stress from chimney mounted antennas, or even blasts from surrounding grounds. With time, you will notice a trail of cracks on walls of flues. In the chimney cap for example, the effect will be clearly noticed. Note that whenever there is a missing or a damaged cap, what will result are leakages as well as rust formation especially on the metal frames.

Usually, sections such as the smokestack top suffer from these damages. Rust especially on metal casings or frames and leakages in chimneys are some of the after results of such damages. Smokestacks that have lasted over long periods without being cleaned are also a potential fire hazard. This is on account of accumulated creosote formed over time. If you restore chimneys in time, you will minimize some of these problems, which can be costly and hazardous when left unchecked.




About the Author:



0 comments:

Post a Comment