When a tree is cut down, what remains is usually referred to as a stump. Cutting down a tree is much easier than removing a stump. It is for this reason stumps are not usually removed after a tree has been cut down. On the other hand, stumps need to be removed since they can be a hazard. When the right tools and the correct procedure is followed stumps can be easily removed. For the best Stump Grinding Western WI needs to be visited.
Removing stumps is important because they take up a lot of valuable space. The space could be put into more productive use. They also reduce the aesthetic value of a place. For instance, in a compound where several trees have been cut down, the sight left behind is usually unpleasant.
Before one decides to remove a stab there are a number of factors to be considered. It is usually easier to remove older tree stumps when compared to removing fresh stumps. It is also hard to remove stumps from deciduous trees since their roots go deeper into the ground. The size of the stab usually determines the method that will be used to remove it.
Mechanical tools like shovels, rakes, grinders and chainsaws can be used when removing stumps. The wood is ground to a small size or completely removed by use of grinders. Dirt around stumps are cleared off by use of rakes and shovels. A chainsaw is used to cut areas that grinders cannot access. The eyes should be kept protected because grinders throw off wood chips which can cause injury.
There are other tools that can be used to remove a stab apart from a grinder. Grinders are usually effective when removing small stumps. A chainsaw is used to cut the upper part of the stab while a shovel is used to dig soil around the stump in order for the roots to be accessed. An axe is then used to cut the roots until it becomes weak. Once weakened, a chain can be tied around the stub and a truck used to pull it out.
Use of chemicals is another way of removing stumps. A chainsaw is used to remove the upper part of the stump before holes are drilled into it using a drill. The holes should be located at the top and sides of the stab. A chemical called potassium nitrate is the poured into the holes. The stab is given about six weeks to become spongy before it can be removed easily using an axe.
One can also use fuel or kerosene to remove the stump. When using this method, holes should be drilled into the stab then filled with fuel. It is then set on fire and left to burn for a week. This will make the wood burn completely leaving white ash behind.
The advantage of using a grinder or burning is that it is easy to dispose the wood chips and ash that forms from the process. If the stump is removed intact, it can be difficult to dispose it. Service companies usually carry away the stab after removing it. This is one of the advantages of hiring a professional service company.
Removing stumps is important because they take up a lot of valuable space. The space could be put into more productive use. They also reduce the aesthetic value of a place. For instance, in a compound where several trees have been cut down, the sight left behind is usually unpleasant.
Before one decides to remove a stab there are a number of factors to be considered. It is usually easier to remove older tree stumps when compared to removing fresh stumps. It is also hard to remove stumps from deciduous trees since their roots go deeper into the ground. The size of the stab usually determines the method that will be used to remove it.
Mechanical tools like shovels, rakes, grinders and chainsaws can be used when removing stumps. The wood is ground to a small size or completely removed by use of grinders. Dirt around stumps are cleared off by use of rakes and shovels. A chainsaw is used to cut areas that grinders cannot access. The eyes should be kept protected because grinders throw off wood chips which can cause injury.
There are other tools that can be used to remove a stab apart from a grinder. Grinders are usually effective when removing small stumps. A chainsaw is used to cut the upper part of the stab while a shovel is used to dig soil around the stump in order for the roots to be accessed. An axe is then used to cut the roots until it becomes weak. Once weakened, a chain can be tied around the stub and a truck used to pull it out.
Use of chemicals is another way of removing stumps. A chainsaw is used to remove the upper part of the stump before holes are drilled into it using a drill. The holes should be located at the top and sides of the stab. A chemical called potassium nitrate is the poured into the holes. The stab is given about six weeks to become spongy before it can be removed easily using an axe.
One can also use fuel or kerosene to remove the stump. When using this method, holes should be drilled into the stab then filled with fuel. It is then set on fire and left to burn for a week. This will make the wood burn completely leaving white ash behind.
The advantage of using a grinder or burning is that it is easy to dispose the wood chips and ash that forms from the process. If the stump is removed intact, it can be difficult to dispose it. Service companies usually carry away the stab after removing it. This is one of the advantages of hiring a professional service company.
About the Author:
You can find an overview of the benefits you get when you use professional stump grinding Western WI services at http://www.nrtree.com right now.
0 comments:
Post a Comment